Architectural Plastics
1.800.557.5151
M-F 8am-5pm PST

In Stock: Tru Vue Optium® Acrylic Sheet

TruVue Optium non-glare acrylic

Tru Vue Optium® Museum AcrylicTM is designed to meet the demanding optical requirements of the custom framing and museum industries. Two anti-static, anti-reflective grades are available, with two levels of UV protection, 93% Optium Acrylic® or 98% Optium Museum Acrylic®.

Optium is a "preservation" grade material, suitable for use to protect against vandalism, UV damage and moisture, if the casing is properly designed and built. Architectural Plastics can fabricate your design, or create a design for you.

Almost half the weight of glass, Optium Museum Acrylic provides increased strength and durability and is the only acrylic product available combining both a high quality sputtered anti-reflection coating and superior 98% ultraviolet light blocking protection.

Optium Museum Acrylic is manufactured utilizing a clear abrasion/UV-resistant acrylic sheet. A sputtered thin film multi-layered anti-reflection coating is applied to both sides of the sheet using patented Tru Vue Optium technology. The coating is engineered to meet stringent optical requirements.

Sizes - Raw Sheet Stock

To request a quote or to get more information, please choose "Get a Quote" from the menu above.

 

Handling

Cotton or nitrile rubber gloves should be worn to minimize finger-prints and other particles.

 

 

 

Optium Acrylic® products are covered with a protective film masking on each surface. This masking prevents scratching during handling and cutting and should be left in place on the sheet as long as possible.

 

To remove the masking, start at one corner and pull towards the opposite side of the sheet slowly and evenly without stopping.

 

The masking should never be exposed to excessive sunlight or outdoor conditions for extended periods of time.


 

 

Framing:

40”x60” +

To prevent bowing, twisting, and/or warping during framing, provide reinforcing support of the acrylic sheet during framing.

 

 

Cleaning

Place the acrylic on a clean, non-abrasive surface for cleaning.

 

Use a clean, soft, lint-free or micro-fiber cloth to clean.

 

Do not use coarse or abrasive cleaning agents or dirty cloths.

 

Spray an ammonia-free cleaner onto the cloth and wipe the acrylic.

 

Never spray cleaner directly on the acrylic.


 

 

Cutting

3.0mm Optium Museum Acrylic® and Optium Acrylic®

 

Place Optium on a clean, dust-free work area.

 

Cover the work table with a soft, clean, lint-free felt.

 

Use a Multi-Material cutter “scribe and break” method.


 

Cutting

6.0mm

Fabricate using a power saw with a saw blade specifically designed to cut acrylic. Ask us for saw blade recommendations.

 

 

 

 

3.0mm (1/8”)  Museum Acrylic

Box

Crate

Box/Pallet

1/8”

1/8”

1/8”

48x96in/121.92x243.84cm

48x96in/121.92x243.84cm

48x96in/121.92x243.84cm

32 sq ft

32 sq ft

32 sq ft

1 (box)

40 (crate)

25 (box/pallet)

32 total sq ft

1280 total sq ft

800 total sq ft

 

Approximate weight per lite: 22lbs.

Approximate weight per empty crate: 329lbs.


 

 

6.0mm (1/4”) Museum Acrylic

Box

Crate

Box/Pallet

1/4”

1/4”

1/4”

72x120in/183x305cm

72x120in/183x305cm

72x120in/183x305cm

60

60

60

1 (box)

20 (crate)

25 (pallet)

60 total sq ft

1200 total sq ft

1500 total sq ft

 

Approximate weight per lite: 89lbs.

Approximate weight per empty crate: 500lbs.


 

 

3.0mm (1/8”) Acrylic

Box

Crate

Box/Pallet

1/8”

1/8”

1/8”

48x96in/121.92x243.84cm

48x96in/121.92x243.84cm

48x96in/121.92x243.84cm

32

32

32

1 (box)

40 (crate)

25 (box/pallet)

32 total sq ft

1280 total sq ft

800 total sq ft

 

Approximate weight per lite: 22lbs.

Approximate weight per empty crate: 329lbs.